Mio3 UV v1.3.1

Mio3 UV v1.4.0

Blender 的 UV 編輯插件，以使 UV 展開更加有趣。它包含特別適合角色建模的功能。

位置

UV 圖像編輯器 > 側邊欄 > Mio3

功能：

展開操作

展開：展開時盡可能保持原始位置、大小和角度

直線：展開以使選定的邊緣環變成直線

規范化：規范選定 UV 的大小和位置

網格化：展開以使選定的面變成矩形。可用于四邊形網格

校正：展開使邊界變成矩形

投影展開：通過從與 3D 視圖中選定面的法線平行的角度投影來展開

對齊操作

對齊：將選定元素與頂部、底部、左側、右側或 XY 中心位置對齊

旋轉選定的 UV

翻轉選定的 UV

僅對齊垂直/水平邊緣：僅在垂直或水平方向上對齊邊緣環

定向邊緣：調整島嶼的角度和位置，使選定的邊緣變為垂直或水平

對齊軸：調整為垂直于 X 軸或 Y 軸

定向世界：將島嶼的角度與 Z 軸對齊

對齊接縫：將 UV 坐標與由接縫分隔的相同 3D 頂點對齊

拉伸：對齊島嶼或 UV 組的寬度（v1.3）

分布：均勻分布島嶼（v1.3）

頂點操作

放松：平滑選定的頂點

分布 UV：根據幾何圖形分布 UV/均衡邊長

圓形：調整以形成干凈的圓形

偏移邊界：擴大或縮小島嶼的邊界 UV

島嶼操作

排序：根據 3D 空間中的坐標對島嶼進行排序

堆疊：堆疊相似的島嶼

復制和粘貼 UV 形狀：復制并粘貼形狀，同時保持原始位置

隨機排列：隨機重新排列島嶼位置。如果選擇了兩個島嶼，則交換它們的位置

統一形狀：對齊 UV 形狀，同時保持原始位置

平均島嶼比例：根據 3D 空間中的網格大小調整大小

島嶼排列

網格排序：通過分組和排序排列島嶼

展開：根據 3D 空間中的空間關系自動布局選定的島嶼

對齊身體部位：根據坐標識別身體部位并對齊方向和順序以進行直觀布局

對稱操作

對稱：根據 3D 空間對稱性對稱 UV

對齊對稱：對齊最近的對稱 UV

選擇操作

選擇一個方向：根據 3D 空間中的坐標選擇一側的 UV

鏡像選擇：根據 3D 空間中的坐標選擇對稱 UV

類似：選擇類似的島嶼

邊界：選擇島嶼邊界

僅選擇垂直/水平邊緣

無區域：選擇沒有面積的 UV

翻轉 UV 面：選擇翻轉 UV

標記接縫

基于角度標記接縫

在選擇邊界上標記接縫

實用程序

原始棋盤格地圖使用可愛的原始棋盤格地圖。（使用幾何節點）

填充指南顯示填充指南

UV 到網格：設置 UV 到網格的修改器。（使用幾何節點）（v1.2）

曝光調整：當 UV 網格難以看清時調整紋理的曝光。（v1.2）

A UV editing support addon I'm creating to make UV unwrapping more enjoyable. It includes features particularly suited for character modeling.

Location

UV Image Editor > Sidebar > Mio3

Features:

Unwrap Operations

Unwrap: Unwrap while maintaining the original position, size, and angle as much as possible

Straight: Unwrap so that the selected edge loop becomes a straight line

Normalize: Normalize the size and position of selected UVs

Gridify: Unwrap so that the selected face becomes a rectangle. Can be used for quadrilateral meshes

Rectify: Unwrap so that the boundary becomes a rectangle

Projection Unwrap: Unwrap by projecting from an angle parallel to the normal of the face selected in the 3D view

Align Operations

Align: Align selected elements to the top, bottom, left, right, or XY center position

Rotate Selected UVs

Flip Selected UVs

Align Vertical/Horizontal Edges Only: Align edge loops only in vertical or horizontal directions

Orient Edge: Adjust the angle and position of the island so that the selected edge becomes vertical or horizontal

Align Axis: Adjust to be vertical to the X or Y axis

Orient World: Align the angle of the island to the Z axis

Align Seams: Align UV coordinates with the same 3D vertex that are separated by seams

Stretch: Align the width of islands or UV groups (v1.3)

Distribute: Distribute islands evenly (v1.3)

Vertex Operations

Relax: Smooth selected vertices

Distribute UVs: Distribute UVs based on geometry/equalize edge length

Circle: Adjust to form a clean circle

Offset Boundary: Expand or shrink the boundary UVs of the island

Island Operations

Sort: Sort islands based on coordinates in 3D space

Stack: Stack similar islands

Copy & Paste UV Shape: Copy and paste the shape while maintaining the original position

Shuffle: Randomly rearrange island positions. If two islands are selected, exchange their positions

Unify Shapes: Align UV shapes while maintaining the original position

Average Island Scales: Adjust size based on the mesh size in 3D space

Island Arrangement

Grid Sort: Arrange islands by grouping and sorting

Unfoldify: Automatically layout selected islands based on their spatial relationships in 3D space

Align Body Parts: Identify body parts based on coordinates and align orientation and order for intuitive layout

Symmetry Operations

Symmetry: Symmetrize UVs based on 3D space symmetry

Snap to Symmetry: Snap to the closest symmetrical UV

Selection Operations

Select One Direction: Select UVs on one side based on coordinates in 3D space

Mirror Selection: Select symmetrical UVs based on coordinates in 3D space

Similar: Select similar islands

Boundary: Select island boundaries

Select Vertical/Horizontal Edges Only

No Region: Select UVs that do not have an area

Flipped UV Faces: Select Flipped UVs

Mark Seams

Mark Seams Angle-Based

Mark Seams on Selection Boundary

Utils

Original Checker Map Use a cute original checkered map. (using Geometry Nodes)

Padding Guidelines Display padding guidelines

UV to Mesh: Set up a modifier for UV to Mesh. (using Geometry Nodes)(v1.2)

Exposure Adjustment: Adjust the exposure of the texture when the UV mesh is difficult to see.(v1.2)